On-line H NMR spectroscopic investigation of hydrogen bonding in supercritical and near critical CO2–methanol up to 35 MPa and 403 K

On-line NMR spectroscopy can beneficially be applied to studies of supercritical and near-critical fluids as an alternative to optical spectroscopy. Up to now high pressure NMR experiments are predominantly accomplished using custom made NMR batch reactors. The authors present a novel high pressure cell with displacement plunger for on-line NMR experiments on compressible fluids which can be used in conjunction with commercially available SCF NMR flow probes. The on-line technique offers advantages compared to stopped flow techniques such as enhanced control of mixture composition and reaction parameters as well as the facility of engagement into the reaction. The new apparatus is used for NMR studies on hydrogen bonding of methanol in near critical and supercritical carbon dioxide up to 403 K and 35 MPa for which data on the chemical shift of the hydroxyl group and methyl group are reported and interpreted.     

The Effect of Polymer Optoelectronic Properties on the Performance of Multilayer Hybrid Polymer/TiO2 Solar Cells

We report a study of the effects of polymer optoelectronic properties on the performance of photovoltaic devices consisting of nanocrystalline TiO₂ and a conjugated polymer. Three different poly(2‐methoxy‐5‐(2′‐ethylhexoxy)‐1,4‐phenylenevinylene) (MEH‐PPV)‐based polymers and a fluorene–bithiophene copolymer are compared. We use photoluminescence quenching, time‐of‐flight mobility measurements, and optical spectroscopy to characterize the exciton‐transport, charge‐transport, and light‐harvesting properties, respectively, of the polymers, and correlate these material properties with photovoltaic‐device performance. We find that photocurrent is primarily limited by the photogeneration rate and by the quality of the interfaces, rather than by hole transport in the polymer. We have also studied the photovoltaic performance of these TiO₂/polymer devices as a function of the fabrication route and device design. Including a dip‐coating step before spin‐coating the polymer leads to excellent polymer penetration into highly structured TiO₂ networks, as was confirmed through transient optical measurements of the photoinduced charge‐transfer yield and recombination kinetics. Device performance is further improved for all material combinations studied, by introducing a layer of poly(ethylene dioxythiophene) (PEDOT) doped with poly(styrene sulfonic acid) (PSS) under the top contact. Optimized devices incorporating the additional dip‐coated and PEDOT:PSS layers produced a short‐circuit current density of about 1 mA cm^–2, a fill factor of 0.50, and an open‐circuit voltage of 0.86 V under simulated AM 1.5 illumination (100 mW cm^–2, 1 sun). The corresponding power conversion efficiency under 1 sun was ≥ 0.4 %.     

高压锅炉补给水系统管道的腐蚀

讨论了锅炉补给水管道的腐蚀情况 ,指出溶解氧和二氧化碳是产生腐蚀的主要原因 ,其腐蚀速率为0 .4 2mm/a。确保真空除气系统正常运行和二级除盐水箱的密封效果是控制腐蚀的主要手段。在此情况下 ,该管线尚可运行 7年     

NPU-600型制氮注氮设备的开发与应用

氮气已被广泛应用于油气井的开采、完井及修井，但却没有适于油田应用的现场制氮注氮设备，针对这种情况，辽河油田采油院与天津NESSER联合开发了NPU-600型制氮注氮设备，现文介绍了该设备的组成，特性及应用情况。     

糠醛装置腐蚀机理分析及防护

重质糠醛精制装置设备腐蚀严重与糠醛氧化变质有关,通过分析装置设备腐蚀机理和糠醛氧化、变质的原因,提出了用N_2汽提回收和原料脱水等改进措施。     

氮肥工业与21世纪的生物能源

介绍近年来美国生物能源的开发进展情况及其先进的支撑系统，提出如何使我国氮肥工业在发展我国生物能源中起促进作用。     

EMD与KOH溶液的相互影响

利用滴定分析、热失重分析以及XRD方法研究了EMD和KOH溶液混合后的变化。结果表明:碱与MnO2可以相互作用并导致体系温度的升高,碱浓度的下降,EMD中形成Mn3O4以及MnO2中结合水的损失。相互作用的结果与所加KOH溶液的浓度、EMD中的水含量、二者用量的比例关系以及体系的温度有关。     

Enzymic browning of sulphocatechol

When sulphur dioxide inhibits the enzymic browning of catechol catalysed by mushroom tyrosinase, the main reaction product is 4-sulphocatechol. When assessed for its browning potential, this product appears to be unreactive and does not inhibit the enzyme.     

TiO_2压敏电阻陶瓷元件等静压成型试验研究

采用干压及干压加等静压两种成型方法,通过对不同样品的电性能和焊接性能的比较,并通过SEM微观形貌的观察,研究了等静压成型对TiO2压敏电阻陶瓷元件的微观结构及电性能的影响。结果表明,经等静压成型的TiO2压敏电阻陶瓷的微观结构比较致密,气孔减少,元件的电压一致性和焊接性能得到较大的改善。